- Extreme Duty 12-PLY rating
- Improves acceleration without sacrificing engine output
- Up to 1200+ lb load rating
- UTV 12-PLY run-flat
- Focused design for 50 miles at 40 mph devoid of air at 900 lb per tire load
- Universal sizes 26x9x12 & 26x9x14 ATV and UTV
The load limit refers to the load-carrying capacity of a RP tire under optimal conditions and when mated to an equivalent rated wheel. When properly matched and properly installed, it indicates how much weight a tire can support. For example, if a RP tire has a load limit 900 pound, it can support 900 pounds at maximum rated air pressure, installed properly on equal or greater rated wheel (typically a Beadlock). In most cases, the tire rating does not increase vehicle payload without careful consideration of established vehicle limits or engineering analysis. Always consult with OEM or refer to OEM data.
Highway only use vehicles use tires with speed ratings that must be specified, and fitted, to exceed the maximum speed of the vehicle they are mounted on, with regards to their established speed rating code. The RP series tires are designed and tested to similarly establish the speed a tire can carry a load corresponding to its Load Limits. Certain RP tires are also constructed to DOT certification standards and can perform on highways within limits of design. But it should always be noted the RP line of tires are intended for off-highway use only on UTV/RGV/ATV and similar vehicles. Off highway use vehicles are limited by design for highway operations and strict adherence to your local and federal laws must be considered when using RP tires on vehicles used on highways/roadways.